2.5L TFSI

Fuel Pump (FP) Control Module

Special tools, testers and auxiliary items required

• Engine/Transmission Jack (V.A.G 1383 A)

Removing

TT Coupe:

- Remove rear seat bench.

TT Roadster:

- Remove the right side rear panel trim panel.

All Vehicles:

- Disconnect the connector - 3 - from the locking flange cover.






- Remove the grommet - 1 - from the locking flange cover - 2 -.

- Unclip the retainers - arrows - of the cover for sealing flange.






- Remove the locking flange cover.

- Disconnect the connector - arrow - from the locking flange.






- Disengage the parking brake cable - 1 - from the bracket.






- Remove the bolts - 4 -.

Danger of twisting the electric wires too much.

• Lower the fuel tank maximum 20 mm using the (V.A.G 1383 A) so that is it possible to remove the Fuel Pump (FP) control module with the wiring harness and connector.








- Remove the bolts - 3, 4 and 5 -.






- Lower the fuel tank maximum 20 mm using the (V.A.G 1383 A).

- Remove the bracket - 3 - and control module - 2 -.






Installing

Install in reverse order, paying attention to the following:

TT Coupe:

- Install rear seat bench.

TT Roadster:

- Install the right side rear panel trim panel.