Steering Lock Housing Adapter Wiring Harness

Steering Lock Housing Adapter Wiring Harness

Removing






- Remove Steering Column Electronic Systems Control Module (J527). Refer to => [ Steering Column Electronic Systems Control Module (J527) ] Steering Column Electronic Systems Control Module (J527).

- Disconnect electrical connector - 3 - at ignition switch.

- Release the retaining clips in - direction of arrow - and disconnect the - 2 - ignition switch key lock solenoid (N376) connector.

- Remove steering lock housing adapter wiring harness - 1 -.

Installing

Install in reverse order of removal. Note the following:

- Install Steering Column Electronic Systems Control Module (J527). Refer to => [ Steering Column Electronic Systems Control Module (J527) ] Steering Column Electronic Systems Control Module (J527).