Crossmember Braces

Crossmember Braces

Special tools, testers and auxiliary items required

• Torque Wrench 5-50 Nm (V.A.G 1331)

Removing






- Remove diagonal braces => [ Diagonal Braces ] Diagonal Braces.

- Remove lower stabilizer bar clamp bolts - 1 - so bolts - 2 - can be removed next.

- Remove crossmember - 3 -.

Installing

Install in reverse order of removal. Note the following:

Tightening specifications, refer to => [ Subframe, Diagonal Braces, Crossmember, Lower Transverse Link, Upper Transverse Link, Tie Rod and Vehicle Level Sensor Overview ] Subframe, Diagonal Braces, Crossmember, Lower Transverse Link, Upper Transverse Link, Tie Rod and Vehicle Level Sensor Overview

Tightening specifications, refer to => [ Stabilizer Bar Overview ] Stabilizer Bar Overview