Exhaust Temperature Control Assembly Overview
Exhaust Temperature Control Assembly Overview
1 Bolt
2 Bolt
3 Differential Pressure Sensor (G505)
4 Control Pipe
• Control pipe from the exhaust gas return cooler to exhaust pressure sensor 1
5 Exhaust Pressure Sensor 1 (G450)
6 Bolt
7 Bolt
8 Exhaust Gas Temperature Sensor 3 (G495)
• 45 Nm
• Removing and installing, refer to => [ Exhaust Gas Temperature Sensor 3 ] Exhaust Gas Temperature Sensor 3
• Note installation position
• Coat with hot bolt paste; Hot bolt paste, refer to the electronic parts catalog ETKA
9 Exhaust Gas Temperature Sensor 2 (G448)
• 45 Nm
• Removing and installing, refer to => [ Exhaust Gas Temperature Sensor 2 ] Exhaust Gas Temperature Sensor 2
• Note installation position
• Coat with hot bolt paste; Hot bolt paste, refer to the electronic parts catalog ETKA
10 Exhaust Gas Temperature Sensor 1 (G235)
• 45 Nm
• Mark the installation position before removing
• Removing and installing, refer to => [ Exhaust Gas Temperature Sensor 1 ] Exhaust Gas Temperature Sensor 1
• Coat with hot bolt paste; Hot bolt paste, refer to the electronic parts catalog ETKA
11 Turbocharger
12 Heated Oxygen Sensor (G39) with Oxygen Sensor Heater (Z19)
13 Exhaust Gas Temperature Sensor 4 (G648)
• 45 Nm
• Mark the installation position before removing
• Coat with hot bolt paste; Hot bolt paste, refer to the electronic parts catalog ETKA
• Lines, Routing, refer to => [ Line Routing, Exhaust System Components ] Removal and Replacement
14 Particulate Filter
15 Oxygen Sensor after Three Way Catalytic Converter (G130)
• Lines, Routing, refer to => [ Line Routing, Exhaust System Components ] Removal and Replacement
16 NOx Reduction Catalytic Converter
17 Clamp
18 Gasket
19 Control Pipe
• Do not change the angles of the control pipe
• Install without tension
20 Nut
• 9 Nm
21 Bracket
• For the control wire
22 Bracket
• For the differential pressure sensor (G505)
23 Bolt
24 Bracket
Exhaust Gas Temperature Sensor Installed Position
- Install the exhaust gas temperature sensor maintaining the angle:
1. Exhaust gas temperature 3 (G495): angle - 23° -
2. Exhaust gas temperature 2 (G448): angle - 30° -