Third Rear Three-Point Seat Belt

Third Rear Three-Point Seat Belt






1 Mounts

• Quantity: 2

2 Anti-Rotation Protector

3 Belt Roller

Removing

- Remove the rear bench seat. Refer to => [ Rear Bench Seat ] Rear Bench Seat.

- Remove right center floor assembly anchorage point. Refer to => [ Rear Center Floor Assembly Mounting Point ] Rear Center Floor Assembly Mounting Point.

- Remove 2/3 rear seat backrest. Refer to => [ Left 1/3 or Right 2/3 Backrest ] Left 1/3 or Right 2/3 Backrest.

- Remove the cover and the cushions on the 2/3 backrest: vehicles without a center armrest, refer to => [ Divided Backrest Cover and Upholstery, Right 2/3 Backrest Without Center Armrest ] Divided Backrest Cover and Upholstery, Right 2/3 Backrest Without Center Armrest, vehicles with a center armrest, refer to => [ Cover, with Center Armrest, Separating from Right 2/3 Backrest Upholstery ] Cover, With Center Armrest, Separating From Right 2/3 Backrest Upholstery.

- Remove nut - 4 -.

- Remove belt roller - 3 -.

- Thread belt webbing - 6 - out of seat belt guide - 5 -.

Installation

To install, perform the steps used in removal in reverse order.

- Ensure anti-rotation protection - 2 - is in mounts - 1 - (quantity: 2).

4 Nut

55 Nm

5 Belt Webbing Guide

6 Belt Webbing