Power Door Lock Control Module: Service and Repair

Comfort System Central Control Module

Special tools, testers and auxiliary items required

• Pry Lever - Rmv Outside Mirror (80-200)

Removing

- Component location, in luggage compartment right rear below side trim.

- Right rear luggage compartment trim removed.

- Disconnect the connectors - 1 - and - 2 -.






- Remove nuts - arrow - and remove holding plate from control module.

- Tighten the nuts to 4.5 Nm.

- Lay open the wiring harness at holding plate using (80-200).

- Disconnect electrical harness connectors - 1 - to - 3 -.






- Press clip - arrow - to the side and pull control module out of holding plate.

- When installing, reinstall cable ties in the same place at which they were removed earlier.