Antenna Amplifier 3 (R112) (CAN)/Antenna Amplifier 4 (R113), MMI

Antenna Amplifier 3 (R112) (CAN)/Antenna Amplifier 4 (R113), MMI

Antenna amplifier 3 /antenna amplifier 4 are on the left and right C-pillars.

Removing and installing is identical.

- Turn off all electrical consumers.

- Remove the key.

Removing

- Remove the C-pillar trim.

- Unlock and disconnect the connectors - 1 -, - 2 - and - 5 - from antenna amplifier 3 - 4 -.






- Remove the screws - arrow - and then remove antenna amplifier 3 - 4 - from the C-pillar - 6 -.

Installing

- Install in reverse order of removal.

Tightening specifications, refer to => [ Antenna Overview ] Antenna Overview.