Outer Door Handle Trim
Outer Door Handle Trim
In vehicles without "keyless entry", trim installed instead of the outer door handle touch sensor.
Removing
- Remove the outer door handle.
- Pry the outer door handle trim - 2 - out using an awl - 1 - at the location shown in the illustration - arrow -.
- Remove the outer door handle trim from the handle - 3 -.
Installing
Install in reverse order of removal. Note the following:
- Slide the outer door handle trim in until it engages audibly.
- Install the outer door handle.
- Install housing. Refer to => [ Housing ] Housing.