Front Wheel Housing Liner
Front Wheel Housing Liner
Special tools, testers and auxiliary items required
• Locking pliers for the Phaeton steering gear (VAS 6199)
Removing
- Remove the nuts - 1 -.
- Remove the driveshaft cover.
- Remove the wing nut- 2 - on the left side of the vehicle and remove the expanding clip on the right side of the vehicle.
- Remove the bolts - 1 -.
- Remove the bolt - 3 - and remove the mount on the fender.
- Remove the clips - 2 - and then remove the expanding clips from the wheel housing liner - 4 -.
- To remove the clips - 3 -, unlock the release lever - 2 - with needle nose pliers in - direction of arrow A - and push it off the pin - 1 - in - direction of arrow B -.
- Remove the wheel housing liner.
Installing
• Tightening specifications, refer to => [ Wheel Housing Liner Assembly Overview ] Description and Operation.
Install in reverse order of removal. Note the following:
- Make sure the clip is secure after installing it.