Driver Door and Front Passenger Door Control Modules J386/J387
Driver Door and Front Passenger Door Control Modules J386/J387
- Remove the door trim panel.
- Open the release and the disconnect the connectors - 1 - and - 2 -.
- Disconnect the connector - 3 -.
- Disconnect the connector - 2 - on the door control module.
- Press the retaining detent - 5 - in - direction of arrow - and disengage the door control module - 6 - on the door shell.
Installing
- Installation in reverse order of removal making sure the retainer locks into the inner door panel.