Bushing and Guide Pins, FN-3 Brakes

Bushing and Guide Pins, FN-3 Brakes

• When removing, mark brake pads that will be used again. Install in the same position, otherwise braking effect will be uneven!

Removing

- Loosen the brake caliper at the pins - 12 -.






- Remove the brake caliper.

Do not let the brake caliper hang from the brake hose. Secure it to the body with suitable cable ties or wire. Do not support the weight with the brake hose.

- Remove the bushing from the brake caliper.

Installing

Installation is performed in reverse sequence.

- Use new guide pins.