Window Regulator

Window Regulator






1 Window Regulator

• Removing

• The door trim panel is removed.

• Window regulator motor removed. Refer to => [ Window Regulator Motor ] Window Regulator Motor.

• Door glass removed. Refer to => [ Front Door Window ] Front Door Window

• The door inner panel cover is removed. Refer to => [ Inner Door Panel Cover ] Inner Door Panel Cover

- Release the window regulator motor threaded pins and push it through the inside panel.

- Only loosen the upper nut.

- Remove the lower nut and lift the window regulator upward and out of the door.

2 Door

3 Nut

• Loosen only for removing the window regulator.

4 Nut

• Remove when removing the window regulator.

Releases the threaded pins






- Release the clips - arrow - on the window regulator threaded pins - 3 - using an 11 mm socket by sliding the socking onto the threaded pins.

- Remove the clip - 1 - for the cable - 2 - from the inner side of the cable guide - 1 -.

Upper connecting point for the window regulator






- To remove the window regulator - 1 -only remove the nut - 2 -.