Headlamp Washer Pump
Headlamp Washer Pump
Special tools, testers and auxiliary items required
• Hose Clamp Pliers (V.A.G 1921)
• Drip Tray
Removing
- Remove the washer fluid reservoir. Refer to => [ Washer Fluid Reservoir ] Washer Fluid Reservoir, but only pull it out until the headlamp washer pump (V11) is accessible.
- Place a drip tray under the windshield washer fluid reservoir.
- Disconnect the electrical connector - 1 -.
- Remove the washer fluid hose - 3 - from the headlamp washer pump.
- Remove the headlamp washer pump - item 2 - upward out of the washer fluid reservoir.
Installing
Install in reverse order of removal, observing the following:
• Secure all hose connections using standard hose clamps, refer to the parts catalog.
- Check the sealing grommet for damage.
- Install the washer fluid reservoir. Refer to => [ Washer Fluid Reservoir ] Washer Fluid Reservoir.