Diagram 39/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Night vision system control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J533 - Data bus on board diagnostic interface Locations

J853 - Night vision system control module Locations

ST1 - Fuse panel 1

SB10 - Fuse 10 (on fuse panel B) Overview Of Fuses

T12b - 12-pin connector Infrared Camera Control Module -J853-

T32b - 32-pin connector Locations

T46a - 46-pin connector Locations

TV41 - Extended CAN bus high wire junction

TV42 - Extended CAN bus low wire junction

(44) - Ground connection on A-pillar, lower left [1][2]Ground Locations

(367) - Ground connection 2 (in main wiring harness)

(368) - Ground connection 3 (in main wiring harness)

(B108) - CAN bus extended high connection 1 (in main wiring harness)

(B109) - CAN bus extended low connection 1 (in main wiring harness)

(B279) - Positive connection 3 (15a) (in main wiring harness)

* - Refer to applicable wiring diagram for fuse positions

*2 - Data bus wire (CAN bus)

Next Diagram 39/3 (Tracks 15-28)