Interior - Sunglass Holder Will Not Latch Closed
96 Sunglass holder will not close96 12 33
2027416/2
May 22, 2012.
Supersedes Technical Service Bulletin Group 96 number 11 - 20 dated August 22, 2011 for reasons listed below.
Affected Vehicles
Condition
The sunglass holder in the dome light assembly will not latch closed.
Technical Background
The sunglass holder spring latch mechanism may have been damaged during the assembly procedure.
Production Solution
Optimized sunglass holder spring latch and dome light installation procedure.
Service
Check the movement of the sunglass holder and if the operation is smooth (guide pins and springs on side of holder are okay) replace only the sunglass holder spring latch (push-push element) in the dome light assembly.
Tip: Do not replace the dome light assembly.
Warranty
Required Parts and Tools
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information.