Replacing Radial Oil Seal For Input Shaft

Replacing Radial Oil Seal For Input Shaft

Transmission Removed:

- Remove guide Sleeve.





- Unscrew guide Pipe.

Installation

Install guide pipe and bolts with a surface sealing compound
Sealing surface and bolts must be cleaned thoroughly and dried of oil

NOTE: Collar on inside surface of flange.





- Drive Out radial oil seal in direction of guide tube with Special Tool 24 1 040.





- Drive in radial oil seal with Special Tools 23 1 220 and 00 5 500.
- Lubricate sealing lips of radial oil seal with oil.

- Transmission 260/6 or 260 Sport: Lift out radial oil seal.


- Drive in radial oil seal with Special Tools 23 1 220 and 00 5 500.
- Lubricate sealing lip with oil.