Test Step 10.1
Test 10.1:
EML defect code (throttle valve reduction, increase, preset value):
Other indicators:
- In the case of a static defect, when the ignition is switched on, ASC-PALA lights briefly (approx. 150 msec) then remains oft. After starting the engine "ASC defect" appears in the display unit of the instrument cluster.
See:
- BMW DIAGNOSTIC SYSTEM. *D* DME and EML defect code memories
Check:
Wires from
- Pin 43 to EML control unit Pin 13
- Pin 48 to EML control unit Pin 35
- Pin 46 to EML control unit Pin 34
- Pin 47 to DME control unit Pin 50
DME:
- Check for correct connection, continuity (resistance) or a short to ground (-) or positive (+).
- Caution: Detach connector at the EML and DME control units for measurements (defect code memories are cleared).
________________________________
*D*: Diagnostic Mode; Connect the BMW DIAGNOSTIC SYSTEM to the vehicle. Select control unit and set up diagnostic mode with the control unit.