Engine Oil Dipstick - Excess Removal Effort
89BMW08Group 11 Engine
Bulletin Number 11 03 88 (1668) Page 1 of 1
Woodcliff Lake, NJ November 1989 Technical Dept.
This Service Information Bulletin supersedes S.I. 11 03 88 (1668) dated May 1988. It lists a revised defect code.
Please remove and discard S.I. 11 03 88 (1668) dated May 1988 from your S.I. binder.
SUBJECT: Engine Oil Dipstick Removal Effort
MODEL: 750iL
Complaint: Excessive effort required to remove engine oil dipstick.
Cause: Smooth the sealing section of oil dipstick tube.
Procedure: - Remove windshield washer fluid tank.
- Detach oil dipstick tube from engine.
- Smooth the sealing section (top inside 30 mm) of oil dipstick tube with
400 grit sandpaper.
- Wash and blow out all sanding residue from oil dipstick tube.
- Install oil dipstick tube and windshield washer fluid tank in reverse sequence.
- Start engine and check for leaks.
- Check windshield washer operation.
Warranty
Status: This repair is reimbursed under the terms of the BMW New Car Limited
Warranty of 3 Years/36,000 Miles.
Defect code: 11 43 01 48 00
Labor operation: 00 50 723
Labor allowance: 6 FRU