Dashboard / Instrument Panel: Service and Repair

Removing and Installing Dashboard Trim Panel

- Remove center console, refer to Service and Repair
- Remove glove box, refer to Glove Compartment
- Remove instrument panel, refer to Service and Repair

- Unscrew screws.
- Remove trim panel.
- If applicable, disconnect plug for radio speaker.

- Pull off rubber seals for left and right doors carefully.

- Lift trim panel off of left and right A pillars.

- Unscrew screws on left and right sides.

- Disconnect plug.

- Disconnect wire connector.

- Disconnect wire connector.
- Pull off plug.

- Lift out dashboard.

Installation

- Check for correct seating of mounting clips on body.
- Align instrument panel.

- Unscrew screw.
- Lift out air grill.

- Unscrew screws.
- If applicable, pull off plug.

- Unscrew screws.
- Remove air ducts.

- Disconnect wire connector
- Remove wire harness.