Instrument Carrier - Removing and Installing

Removing And Disassembling Instrument Cluster:
- Remove steering wheel.



- Unscrew screws.




- Pry out top of instrument cluster slightly and pull forward up to the steering column.
- Then fold it down completely and remove.




- Press up levers next to the plugs and then pull off plugs.

Installation:
- Levers must be positioned up when inserting the plugs.




- Turn toggle screws 90° counterclockwise and fold up housing with electronic printed circuit board.




- Pull both housing sections apart.




- Pull off knobs.




- Unscrew screws and pull system carrier off of the instrument carrier.





Note:
- Make sure that the LCD module does not fall out while pulling off.
- Note spacers on the bottom screws.




- Pull up pertinent gauge carefully to replace it.

1 Fuel gauge
2 Speedometer
3 Tachometer and economy control
4 Temperature gauge
5 LCD module