Printed Documents

While in any screen if "Print" then "shield" is selected (2).





A copy of the screen complete with borders will be printed. This printing takes extra time and does not print the vehicle information or complete schematics. For a more useful schematic printout follow the instructions below.

1. Highlight the header of the window that you wish to print. The header will turn yellow.
2. Select "Print"
3. Select "Document"

This will print a more useful schematic that will not have the borders but will contain:





1. Date
2. Time
3. Page number (this style of printout may contain multiple pages for entire schematics)
4. Description (example: Drivers side power window)

Vehicle information (example: 5 E39/540iA M62 Lim/USA LHD/1997)

The style of the schematic printed out will be closer in design to printed ETMs.

If you have selected a module with more complex peripherals such as the general module, the schematic may not contain printed descriptions of the peripherals. To view a description of the pin assignments complete with:

1. Pin number
2. Pin Type
3. Description of signal type
4. Connection/measurement notes

Select the header on top of the schematic (turns yellow) then:





1. Select "Document"
2. Select the "PB" description on the "Right page" in this example it was "A1 General Module PB"
3. Select "Display"





Now the general module schematic will be on the left page and the pin assignments.will be on the right. The pin assignment section (PB) and the schematic (SP) can both be printed as described at the beginning of this section. This will allow you to have a complete layout of the desired component and a description of the pin assignments.





You may also print a copy of the diagnosis report while in the document mode (3). The diagnosis report: will contain:

1. Date/Time
2. Retailer information
3. DIS software installed
4. Vehicle information
5. Quick test results
6. Operations performed in order