Service Action Label and Warranty Information

Service Action Label Instructions:
This Service Action has been assigned code number 80. After the vehicle has been checked, and corrected if necessary, obtain a label (SD 91-013) and:

a) emboss your BMW dealer warranty number in the middle of the label;

b) punch out code number 80 printed on the label;





c) bend label to crease an edge and remove the backing paper. Then affix it to the driver's side "B" pillar as shown:

Do not affix one label on top of another one, because a number from an underlying label could appear in the punched out hole of the new label.








Warranty Information:
Covered under the terms of the BMW New Car Limited Warranty. Reimbursement will be via Campaign Entry.

Special Defect Code: 00 23 01 03 00