Replacing Cable For Footwell Ventilation

Procedure:
- Disconnect battery ground lead.
- Remove left side underdash panel.
- Remove lower portion of the center console.
- Remove radio opening mask or radio.





- Pull opening covers (1) or switches (2) out of control panel.
- Pull off plugs (3) on switches (2).





- Unscrew bolts (arrows).
- Pull out control panel slightly.





- Remove cable clamp (1).
- Disconnect cable (2) from lever (3) and remove.





- Remove cable clamp (1).
- Disconnect cable (2) from lever (3) and remove.

Installation Notes:





- Connect cable (1) on slide control (2).
- Push slide control and air flap against stop.
- Turn sleeve (3) until it can be placed in the opening.
- Lock cable with clamp (4).





- Cable sleeve (1) must be flush on stop (2).