Removing Wheel Bearing Inner Race From Hub

Detaching inner wheel bearing race from drive flange

Remove inner wheel bearing race with special tool 33 4 400 from groove in bearing race.





Install special tool 33 1 312.





Depending on outside dia. of inner bearing race, place special tool 33 4 401 with:
33 4 405 for dia. 45 - 51 mm
33 4 406 for dia. 50 - 55 mm
in groove.





Tighten special tool 33 4 401 with wrenches 33 4 403/404 until special tool can still just be turned in groove.
Screw in thread spindle 33 4 402. Detach inner bearing race