Ignition Switch: Service and Repair

Replacing Ignition-Start Switch

WARNING: Refer to Air Bag Service Precautions. Service Precautions

Unscrew screw.

Pull bottom trim panel to the side out of the clips.

Remove screw and take off lower section of steering-column panelling.

Unscrew headless screws on both sides, pull out switch.
Disconnect plug connection.

Installation:
- Check position of ignition-start switch in relation to steering-wheel lock.
- Check position of turn-indicator lever in relation to steering wheel.
- Secure headless screws with varnish.

CAUTION: After assembly, perform a mechanical (lock cylinders) and an electrical (e.g. ignition, radio etc.) function check.