Brake Warning Indicator: Service and Repair
Reset "Brake Lining" Wear Warning IndicatorNOTE: There is no specific reset procedure for the "Brake Lining" Wear Indicator.
- The brake pad wear symbol lights up when the brake pad sensor is interrupted.
- The indicator remains on until the ignition is switches off.
- The indicator is no longer activated after the ignition had been switched on for 30 seconds and the interruption at the brake pad sensor has been corrected.
** Editors Note **
If the "Brake Lining" Wear Warning Indicator remains lit after pad and/or sensor replacement,
- Turn ignition ON.
- Wait 30 seconds.
- Start engine.
If the above procedure is not successful,
- Test wiring circuit for continuity, power and ground. Refer to "Instrument Cluster : Diagrams : Electrical" Electrical Diagrams
- Test Instrument Cluster and clear faults. Refer to "Instrument Cluster : Testing and Inspection" Testing and Inspection