Ignition Switch Lock Cylinder: Service and Repair

Removing and installing/replacing lock cylinder for steering wheel lock

Car with ring antenna:
Remove lower section of steering column trim.
Using special tool 61 3 300, press ring antenna off locking cylinder.





With ignition key, use workshop key for better accessibility, turn lock cylinder to "R" position = radio, windscreen wiper, fan.

Caution: On vehicles with freewheel lock cylinder up to 10/95: twist lock cylinder back through 12°.





Push special tool 32 3 110 into hole of lock cylinder an swivel handle forward by approx. 90°. Remove lock cylinder.