Back Up Light

Selector lever switch

The EGS control unit detects the selector lever position by way of a switch on the transmission. This switch converts the current selector lever position into a code. This selector lever code is
transferred via four lines (L1-L4) to the EGS control unit.

Selector lever L1 to L4 (0 = open, 1= U-batt)
position
P L1 =1, L2 = 1, L3 = 0, L4 =1
R L1 =1, L2 = 0, L3 = 0, L4 =0
N L1 =1, L2 = 1, L3 = 1, L4 =0
D L1 =0, L2 = 0, L3 = 1, L4 =0
4 (3) L1 =0, L2 = 0, L3 = 0, L4 =1
3 (2) L1 =0, L2 = 0, L3 = 1, L4 =1
2 (1) L1 =1, L2 = 0, L3 = 1, L4 =1