Operating Unit

Siemens S10 With Basic Telephone Interface (GSM Network)

Siemens S10 with Basic Interface Telephone (GSM network only)
The BIT basic Interface Telephone is equipped with diagnostic capabilities and a fault code memory.

Functions
The Siemens S10 is connected to the I/K-bus via the Basic Interface Telephone. This enables operation via the on-board monitor, MID and multifunction steering wheel. Hands-free operation is conducted via a microphone and double coil speaker. The output of other sources is interrupted by the mute circuit. Remote data or fax transmission is also possible with a separate connection.

Receiving and passing on special SMS messages:
- Text display of SMS messages in on-board monitor and MID
- Call back to SMS sender
- Storing telephone list on SIM card
- Transferring navigation destinations to vehicle
- Programming independent park heating and ventilation timer
- Transferring vehicle position to control center (with navigation system only)

Components
- Mobile phone with integrated transceiver, rechargeable battery and card reader
- Eject box with electronic charging facility in center armrest
- Basic Interface Telephone with hands-free facility in luggage compartment with link to I/K-bus
- Line compensator(antenna amplifier) for amplifying transmit/receive signal from mobile phone
- Hands-free microphone in headliner for hands-free telephone function
- Double coil speaker for sound output during hands-free telephone operation in driver's/front passenger's footwell
- Antenna