Charger/Docking Station

Charger/Docking Station

The charger/docking station has several functions for MoDiC operation:
- MoDiC software loading
- Charging the MoDiC batteries
- Printer connection link for the MoDiC while docked in the charging station.

The charger/docking contains the following features:

The floppy and CD ROM drives are used to update the MoDiC software and to down load programs. The MoDiC can only gain access to the drives when it is docked on the station.

Battery Charging

The two battery compartments on the docking station are for charging spare batteries.

The status LED on the side of the docking station indicate the state of charge of the batteries being charged.

The batteries in the MoDiC will also be charged while it is docked on the station.

The status LED indicators provide the following information:

Printer Interface

The Docking Station printer interface connections are located on the underside of the unit.

These parallel printer connectors are for connecting the MoDiC docking station to the DIS printer.

A locally purchased Male/Male 25 pin parallel printer cable will be required. Connect as shown in photo.