Body - Window One-Touch Inop After KGM/GM R and R

SI B61 07 09
General Electrical Systems

April 2009
Technical Service

SUBJECT
One-touch Windows Inoperative After General Module Replacement

MODEL
E46 (3 Series)

E60, E61 (5 Series)

E63, E64 (6 Series)

E53 (X5)

SITUATION
After replacing the Body Module (KGM or GM, depending on model) and updating the vehicle software, the one-touch windows are inoperable.

CAUSE
The spare part body module used on this vehicle is different from what was originally installed in the vehicle. The spare part is a low version of the body module. All functions of the module remain unchanged, but the one-touch feature has a default setting of inactive.

CORRECTION
Change the setting for the window one-touch operation via the Car and Key Memory.

PROCEDURE

1. Start an ISTA/P session.

2. Select the "Vehicle" tab.

3. Select the "CKM" tab.

4. Select "Power windows" from the drop-down menu.

5. Set each of the one-touch window selections to Active.

6. Select the Measures Plan button.

7. Accept the Measures Plan and the update will take place.

WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty or the Certified Pre-Owned Program.

Defect Code: 61 38 09 14 00

Labor Operation: Labor Allowance: Description:

Refer to KSD* Refer to KSD Change CKM settings for one-touch windows.







Disclaimer