Replacing Front ABS Pulse Generator

Replacing Front ABS Pulse Generator





Open plug housing (1), pull plug connection (2) out of fixture and disconnect.
Pull cable with rubber grommet out of fixtures on spring strut and on body.
Installation: Ensure proper locking of plug connector and proper seating of rubber grommets.





Release hexagon socket screw (1). Withdraw ABS pulse generator (2) from bore hole.
Installation:
Clean bore hole for pulse generator and grease with lubricating grease Staburags NBU 12/K.
Pulse generator to swivel bearing / wheel carrier 8 Nm








Open plug housing (1), pull plug connection (2) out of fixture and disconnect.
Pull cable with rubber grommet out of fixture on spring strut and on body.
Installation: Ensure proper locking of plug connector and proper seating of rubber grommets.





Release hexagon socket screw (1).
Withdraw ABS pulse generator (2) from bore hole.
Installation:
Pulse generator to swivel bearing / wheel carrier 8 Nm





Installation: Clean hole for pulse generator and grease with lubricating grease.