Removing and Installing/Replacing Gearing for Head Restraint Adjustment

52 17 035 - Removing and installing/replacing gearing for head restraint adjustment





Necessary preliminary tasks:
- Remove shaft Removing and Installing Left or Right Front Seat for head restraint adjustment





Release screws (4) on left and right.
Tightening torque: 52 10 21AZ Front Seats.
Remove retainer (1) on left and right.
Remove gearing (2) on left and right straight towards front.

Installation:
To ensure identical adjustment of gearings (2), carry out following work step on both gearings:
- Unscrew component (5) until threaded rod (6) is flush with edge (3).