Removing and Installing/Replacing Left/Right Sides of Backrest on Rear Seat Backrest (Through-Loading)

52 26 008 - Removing and installing/replacing left/right sides of backrest on rear seat backrest (through-loading)





Pull seat belt to middle and place behind head restraint.
Pull top backrest side section (1) forwards (unclip) remove towards top (2).





Installation:
Pull clip (1) forwards out of sheet metal.





Installation:
Check clip (1) and mount (2) for damage.
Slide clip (1) into mount (2) of backrest side section.





Installation:
- First feed guides (1 and 3) on backrest side section into mounts (2 and 4) of body.
- Then press backrest side section downwards so that guides are correctly seated in mounts.
- To finish, clip in backrest side section at top.