Replacing Solenoid Valve for Inlet Side on VANOS Adjustment Unit

11 36 570 - Replacing solenoid valve for inlet side on VANOS adjustment unit





Special tools required:
- 32 2 110





Necessary preliminary tasks:
- Read out fault memory of DME control unit
- Check stored fault messages
- Switch off ignition





Unlock hose (1) and detach.
Unlock plug (2) and remove.





Note:
Once it has been removed, oil drips from the solenoid valve.
Have a cleaning cloth ready.
Make sure no oil drips onto the belt drive. Remove any remnants of oil immediately with cleaning cloth.
Do not damage oil line when releasing solenoid valve.
Release solenoid valve with special tool 32 2 110.

Installation:
Tightening torque 11 36 1AZ 11 36 Variable Camshaft Control VANOS.
Now clear the fault memory.