Removing and Installing/Replacing Trim for Release Handle on Front Left or Right Seat

52 14 ... - Removing and installing or replacing trim for release handle on front left or right seat





Necessary preliminary tasks:
- Remove rear panel Removing and Installing/Replacing Rear Panel on Left or Right Front Seat Backrest
- Disconnect battery negative lead 61 20 900 Disconnecting and Connecting Battery Negative Lead





Important!
Screw (1) must not fall between airbag module and backrest frame.
If necessary, remove airbag module Service and Repair.
No sharp-edged objects permitted in area of side airbag.

Release screw (1).

Unclip side trim cover from backrest.

Installation:
Place seat belt between seat belt guide and trim cover.
Make sure the trim cover is fitted correctly in the guide.





Unfasten plug connection (1) and disconnect.
Replacement only:
Unclip toggle switch.