Air Cleaner Housing: Service and Repair

13 71 000 Removing and Installing/Replacing Intake Silencer Housing (N54)







For E60/E61 the operation is described in:
Removing and installing/replacing intake silencer housing


Necessary preliminary work:
- Remove intake port







Unclip B+ cable strip (1).







Illustration shows microfilter housing removed for purposes of clarity.
Pull wiring harness holder (1) upwards.







Release clamp (1) and detach air intake hose.
Tightening torque 13 71 2AZ.







Release clamp and detach air intake hose.
Tightening torque 13 71 1AZ.
Unlock and disconnect line (1).
Unclip line (1) from air filter housing.







Slightly raise front of intake silencer housing (1) in direction of arrow.
Press rear of intake silencer housing upwards out of mounting points and remove.







Installation note:
Push rear area of intake silencer housing (1) under B+ cable strip (2) and guide (3).
While doing so, push guide (3) up a little.

y� :