Seat Temperature Switch: Service and Repair

61 31 164 - Removing and installing/replacing rear left or right switch combination (seat heating, head restraint)





Special tools required:
- 00 9 317
- 00 9 341

Fold down center armrest.

Open upper armrest section.





Pull out rear middle head restraint (1) a little.

First lever out front catches (2) of cover frame (3) with special tool 00 9 317 .

Then unclip cover frame (3) all round with special tool 00 9 317 and remove.

Installation:
Detent lugs of cover frame (3) must not be damaged.





Disconnect plug connection (1).





Using special tool 00 9 341, depress catches (1) and press out rear switch combination (2) in direction of arrow.