66 20 520 Removing and Installing/Replacing an Ultrasonic Transducer at Front (Inside) (Park Distance Control)

66 20 520 - Removing and installing/replacing a front ultrasonic transducer (side)





Necessary preliminary tasks:
- Remove front bumper trim 51 11 156 Removing and Installing Front Bumper Trim





Disconnect plug connection (1) and remove rubber grommet (2).

Installation:
Make sure rubber grommet (2) is securely seated.





Unlock retaining tabs (1) in direction of arrow and pull ultrasonic transducer (2) out of holder.





Installation:
Make sure rubber ring (1) is correctly seated on ultrasonic transducer (2).