Operation CHARM: Car repair manuals for everyone.
Home >> BMW >> 2009 >> X6 (E71) L6-3.0L Turbo (N54) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Lighting and Horns >> Headlamp Alignment Control Module >> Service and Repair >> Replacing Drive/Electronics Box for Left Adaptive Headlight
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Replacing Drive/Electronics Box for Left Adaptive Headlight



63 12 895 Replacing Drive/electronics Box For Left Adaptive Headlight







WARNING:
Version with xenon headlights: Danger to life due to high voltage! Therefore, before removing, disconnect all components from the power supply (lighting system and ignition off).
Work on the entire xenon lighting system (control unit, ignition unit with lamp) may only be carried out by specialist personnel.







IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).







Necessary preliminary tasks:
- Remove front wheel arch cover (front section)







Release screws (1). Tightening torque 63 12 4AZ.
Remove drive/electronics box for adaptive headlight (2) from headlight.

Installation:
Make sure seal is correctly fitted on drive/electronics box for adaptive headlight (2).
Fit drive/electronics box for adaptive headlight (2) exactly on headlight.
Make sure pin housing (3) of drive/electronics box for adaptive headlight (2) is correctly seated in headlight plug housing (4).







Carry out vehicle programming/encoding.





pro multis · About Operation CHARM