61 35 ... Notes on ESD Protection (Electro Static Discharge)

61 35 ... Notes On ESD Protection (Electro Static Discharge)

Special tools required:







NOTE:
Electrical components which are particularly sensitive to electrostatic discharge (electronic control units, sensors, etc.) are marked with the ESD warning symbol.
E-Electro
S-Static
D-Discharge







IMPORTANT: Read and comply without fail with the notes on this subject from Service Information 2 06 04 128.







Statically charged persons can discharge themselves when they touch electrical components.

NOTE:
Humans can only detect a discharge starting from a level of approx. 3000 V.
The danger threshold for electrical components already starts from a level of approx. 100 V.











Example:
Mechatronic control unit.







IMPORTANT:
Do not touch pins and multi-pin connectors directly.
Touch electrical components by their housings only.

IMPORTANT:
To avoid damaging or destroying electrical components as a result of electrostatic discharge, it is absolutely essential to observe the following instructions:
- When replacing electrical components, leave the replacement components in their original packaging until immediately before they are to be installed
- If necessary, always return a removed component in its original packaging (always pack the component away immediately)
- Read and comply with user information on using the associated special tool 12 7 060 12 7 060 Antistatic Mat (ESD)







Personal protective equipment:
Electrically conducting clothing (high wool content, antistatic shoes required). These can primarily be identified by the logo on the side.