54 13 105 Removing and Installing/Replacing Rear Drip Molding

54 13 105 - Removing and installing/replacing rear drip moulding





Necessary preliminary tasks:
- Remove complete glass slide/tilt sunroof
- Remove glass slide/tilt sunroof lid at rear





Unlock tab (2) and remove drip moulding (1) towards top.

Note:
2 springs are loosely connected to guide for drip moulding.

Installation:
Make sure springs are reinstalled on drip moulding carriers.





Removing drip moulding carrier:

Note:
Drip moulding carrier cannot be removed without incurring damage.

Break out tabs with a screwdriver and lever out carrier.

Installation:
Replace drip moulding carrier and hook into place.