Rubber Conduit Replacement - Front Door

Rubber Conduit Replacement - Front Door

Removal Procedure





1. Remove the left or right instrument panel insulator as required. Refer to Closeout/Insulator Panel Replacement - Left (Closeout/Insulator Panel Replacement - Left) or Closeout/Insulator Panel Replacement - Right (Closeout/Insulator Panel Replacement - Right) .
2. Disconnect the electrical from the front door wiring harness.
3. Remove the door rubber conduit from where it attaches at the windshield pillar.
4. Remove the conduit from the front door.
5. Remove the front door wiring harness out from the rubber conduit.



Installation Procedure





1. Install the wiring harness from the front door through the rubber conduit.
2. Install the rubber conduit to the front door.
3. Install the rubber conduit to the windshield pillar.
4. Connect the front door wiring harness electrical connector.
5. Install the left or right instrument panel insulator as required. Refer to Closeout/Insulator Panel Replacement - Left (Closeout/Insulator Panel Replacement - Left) or Closeout/Insulator Panel Replacement - Right (Closeout/Insulator Panel Replacement - Right) .