Instrument Panel Assist Handle Replacement

Instrument Panel (I/P) Assist Handle Replacement

Removal Procedure

1. Remove the instrument panel (I/P) cluster trim plate bezel . Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Aztek) (Instrument Panel Cluster (IPC) - Trim Plate Bezel Replacement)Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Rendezvous) (Instrument Panel Cluster (IPC) - Trim Plate Bezel Replacement) .




2. Remove the nuts from the assist handle and remove the assist handle.



Installation Procedure






Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the assist handle to the instrument panel. Install the assist handle nuts.

Tighten the nuts to 8 N.m (71 lb in).

2. Install the I/P cluster trim plate bezel. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Aztek) (Instrument Panel Cluster (IPC) - Trim Plate Bezel Replacement)Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Rendezvous) (Instrument Panel Cluster (IPC) - Trim Plate Bezel Replacement) .