External Transaxle Mounted Linkage

Refer to accompanying image for external transaxle mounted linkage view.

1. Install bracket (121).

2. Install attaching bolts (123). Torque bolts to 17 ft lbs.

3. Install collar (125) and pin (126).

4. Install pivot (124) and pin (122).

5. Install retainer (120).

6. Install lever (127).

7. Install washer (128) and attaching nut (129). Torque attaching nut to 61 ft lbs. Do not allow lever (127) to move during installation of nut (129).

8. Install fluid lever indicator assembly (110).

9. Install electronic speedometer sensor assembly (172), retainer (212) and attaching bolt (213). Torque attaching bolt to 84 inch lbs.