Torque Converter Clutch (TCC) Solenoid

TORQUE CONVERTER CLUTCH (TCC) SOLENOID 4T60 (440-T4)

REMOVE OR DISCONNECT

1. Negative battery cable.
2. Case side cover pan. Refer to "Case Side Cover and Gaskets".
3. Screws retaining solenoid.
4. Electrical connector and solenoid.

INSTALL OR CONNECT
1. Electrical connector and solenoid.
2. Retaining screws.

TIGHTEN
^ Screws to 14 Nm (10 lb. ft.).

3. Case side cover pan. Refer to "Case Side Cover and Gaskets".
4. Negative battery cable.
5. Fill transaxle to proper level.