Intake Manifold Upper

REMOVE OR DISCONNECT

Note: Do not disassemble upper intake manifold from lower intake manifold unless replacement of one of the components is necessary.

1. Fuel injector sight shield and air intake duct.

Spark Plug Wiring Harness (Rear):

Spark Plug Wiring Harness (Front):

2. Spark plug wires on right side of engine and set aside.
3. Fuel rail.
4. Exhaust heat shield.

Throttle Cable Bracket To Throttle Body:

5. Cable bracket to cylinder head mounting bolt.

Upper And Lower Intake Manifold Assembly:

6. Upper intake manifold bolts and upper manifold.