Wind Noise At Rear Door Window

IX. Wind noise at rear door window run channel to door frame.





1. Lower the door glass.
2. Remove the front, top and rear portion of the run channel from the retainer from the door frame by pulling down and outboard on the run channel.
3. Using bedding and glazing compound, run a 5 mm bead around entire inboard edge of the retainer (See Figure 5, Section A-A).
4. Using bedding and glazing compound, fill the cavities in the bracket area of the upper front corner of the door header and (Buick Roadmaster only) at the top of the division post. (See Figure 5, View B).
5. Spray the window run channel with glass cleaner for ease of installation.
6. Reinstall the window run channel using a plastic trim stick to insure that the run channel is fully seated in the retainer (See Figure 5, View C).

WARRANTY INFORMATION:

Labor Operation: T1899
Labor Time: 0.3 Hr.
0.2 Hr. Each Additional Door