Wind Noise At Front Door Window

Figure 4

VIII. Wind noise at front door window run channel to door frame.

1. Lower door glass.
2. Remove the window run channel from the retainer in the header of the door frame by pulling down and outboard on the run channel.
3. Using bedding and glazing compound, run a 5 mm bead around the inboard edge of the retainer (See Figure 5, Section A-A).

4. Using bedding and glazing compound, fill the two cavities in the upper rear corner of the door frame (See Figure 5, View A).
5. Spray window run channel with glass cleaner, for ease of installation.
6. Reinstall the window run channel, using a plastic trim stick to ensure that the run channel is fully seated in the retainer (See Figure 5, View C).