Warranty Information

Labor Operations and Time Allowances.

MATERIALS REQUIRED: FOR DOOR WEATHERSTRIP SEALING

- Use sealer such as 3M P/N's 08302 or 08405, *Dominion/American Sure Seal P/N LSC, Kent P/N 10500 or equivalent.

IMPORTANT:
DO NOT USE BLACK type sealers that remain soft, or "uncured" for sealing door opening weatherstrips to flanges.

Repair front door weatherstrips and flanges by (See Figure 2).

1. Removing the windshield pillar garnish molding and center pillar trim.

2. Partially remove the weatherstrip from the upper flange areas by grasping with hand and pulling. The portion of the weatherstrip on the rocker flange may be left in place.
3. If gaps at the flange joints exist (Indicated on Figure 2), apply sealer to fill the gaps at the joints.

4. Apply a continuous bead of sealer to the upper length of the weatherstrip cavity, from the front corner of the rocker area to the rear corner of the rocker area (See Figure 2, Section A-A).
5. Reinstall weatherstrip to the flange.
6. Reinstall the windshield and center pillar garnish moldings.





WARRANTY INFORMATION:

REPAIR REAR DOOR WEATHERSTRIPS AND FLANGES BY:

1. Remove rear seat cushion and back assemblies.
2. Remove center pillar trim.
3. On sedan styles, remove quarter upper trim and lock pillar trim. On wagons, loosen the (B001) Lock Pillar Trim Panel.
4. Partially remove the weatherstrip from the flange areas by grasping with hand and pulling. The portion of the weatherstrip on the rocker flange may be left in place.
5. If gaps at the flange joints exist, apply sealer to fill the gaps at the joints.
6. Apply a continuous bead of sealer to the upper length of the weatherstrip cavity, from the front corner of the rocker area to the rear corner of the rocker area.
7. Reinstall the weatherstrip to the flange.
8. Reinstall the quarter trim (or lock pillar trim panel).
9. Reinstall the rear seat assemblies.
10. Reinstall the center pillar trim.





WARRANTY INFORMATION